Anyway you look at it – the MDX-540 SRP® System is a winner. It’s one of the fastest and most accurate RP systems on the market. And its price tag is less than half most additive systems. The desktop device comes complete with powerful CAM software, making it easy to quickly produce everything from functional and snap-fit prototypes to light metal molds and custom jewelry.
SRP technology:
Creates the most accurate prototypes for complex snap-fits
Creates prototypes for functional testing and proves part manufacturability
Handles a wide variety of materials and generates a smooth surface finish
400W DC Brushless motor with increased torque for fast, accurate prototypes
Bundled, user-friendly CAM Software
Handheld controller and virtual control panel make set up fast and easy
Specialty MDX-540S and MDX-540SA models available for enhanced precision and repeat accuracy
Optional 4th rotary axis and automatic tool changer
Maximum 19.68" x 15.74" x 6.10" XYZ-Axis Travel
Four Models:
MDX-540 - $19,995
MDX-540A - $29,995
MDX-540S - $24,995
MDX-540SA - $34,995
List Price:
MDX-540:
$19,995
(US Dollars)
MDX-540A:
$29,995
(US Dollars)
MDX-540S:
$24,995
(US Dollars)
MDX-540SA:
$34,995
(US Dollars)
MODEL
MDX-540
MDX-540S
Usable Materials
Plastic, resin, wood and non-ferrous metals
XYZ-Axis Travel
19.6(X) x 15.7(Y) x 6.1"(Z)[500 (X) x 400 (Y) x 155 mm (Z)]
Milling Area with Optional Rotary Axis (ZCL-540)
7.0” Diameter x 14.6” Length
[177.8mm Diameter x 370.8mm Length]
Distance From Spindle Nose to Table
Maximum 10" (254mm)
Table Size
21.7(W) x 16.5"(D) [550(W) x 420mm (D)]
Loadable workpiece weight
At acceleration of 0.2G: maximum 26lb (12kg), 0.1G: 44lb (20kg), 0.05G: 44lb (20kg)
+/-0.004"/12"(+/-0.1mm/300mm), under no-load conditions
Repeat accuracy
+/-0.0019"(+/-0.05mm), under no-load conditions
+/-0.0008"(+/-0.02mm), under no-load conditions
Origin reproducibility (when the power is switched on/off)
+/-0.0019" (+/-0.05mm)
+/-0.0008" (+/-0.02m)
Spindle motor
DC brushless motor, maximum 400W
Spindle speed
400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering
Tool chuck
Tool holder format, Taper shank: JBS4002 15T
Control command sets
RML-1 and NC codes
Interface
USB (compliant with Universal Serial Bus Specification Revision 1.1)
Power supply
Voltage and frequency: AC 100 to 120 V/220 to 240 V +/-10%, 50/60 Hz
Required power capacity: 7A (100 to 120V)/4A (220 to 240V)
Power consumption
Approx. 700W
Acoustic noise level
During operation (no cutting): 65dB (A) or less, during standby: 40dB (A) or less (according to ISO 7779)
Dimensions
Width x depth x height: 29.3 x 37.6 x 33.8" (745 x 955 x 858mm)
Width x depth x height: 30.1 x 37.6 x 33.8" (765 x 955 x 858mm)
Weight
249lb (109kg)
Operating temperature
41 to 104F (5 to 40C)
Operating humidity
35 to 80% (no condensation)
Included items
Handy panel, power cord, tool sensor, sensor cable, nut, nut wrench, wrench, hexagonal wrenches, Roland Software CD-ROM, SRP Player CD-ROM, User's Manual, Roland Software Guide, SRP Player Installation and Setup Guide, NC Code Reference Manual, and Automatic Tool Changer (Refer to the ZAT-540 specs below.)
Automatic Tool Changer (ZAT-540)
Number of tools housed
4
Maximum tool length
4.3” (110mm)
Maximum tool diameter
0.4” (10mm)
Maximum tool weight
0.77lb (350g)
Tool-holder format
Taper shank: JBS4002 15T
Tool-selection method
Direct-changing type, fixed-address specification
Compatible compressed air
102 to 145 psi, 1.8CFM (0.7 to 1.0 MPa, 50 L/min or higher)
Spindle speed
400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering
Weight
15lb (6.8kg) (total weight including spindle, magazine, control box, etc.)
Included items
Control box, magazine unit, ATC spindle, air cylinder, base plate, Z-origin sensor, spacer, cap screws, hexagonal wrenches, retaining bands, cable retainers, and user's manual
